VEDATUDO
10 cm

GENERAL INFORMATION

Self – adhesive tape based on asphalt, protected with an aluminum film and may be exposed to weather and sunlight. Easy to apply is the solution for small infiltration problems. Ideal for uneven surfaces.

Suitable for: roofs, flashings, ventilation ducts and air conditioning, sheds, domes, awnings, gutters and slabs. Indicated for areas that do not require mechanical protection and ensuring watertightness and high thermal reflection.

*It is not suitable for places subject to high temperature.

PRICE QUOTE
Put down the amount you would like to put in your budget, after adding your product you can close and send your order.
UNITS
SHARE

Carry out surface cleaning in such a way as to remove all loose particles and residues.

On the dry substrate, apply the DRYKOPRIMER ACQUA or DRYKOPRIMER ECO asphalt solution, wait a drying time of at least 6 hours, after removing the plastic film and start applying the VEDATUDO, pressing against the printed surface to increase its adhesion and its effectiveness.

VEDATUDO is not suitable for surfaces with high temperatures. Its performance depends on the application, equipment and type of substrate. Improper use of the product can damage the quality and yield of the product, being the sole responsibility of the applicator.

VEDATUDO is not resistant to hailstorms, it should not be applied under immersion conditions, pipe repairs or negative pressure. You should not be exposed to trafficking in persons or vehicles.

In very cold areas, preheat the VEDATUDO with hot air or through the heat of the sun and preheat the substrate with a torch.

Application conditions:

Substrate temperature: Minimum: 20 ° C – Maximum: 50 ° C Ambient temperature of VEDATUDO for application: Minimum: 20 ° C

Validity of 24 months from the date of manufacture, provided that it is stored in an upright position, in its original and intact packaging, in a dry, well-ventilated place and away from heat sources and at temperatures in the range of 5 to 25 ° C.

We guarantee the quality of our products against manufacturing defects. We do not assume responsibility for the performance of the work because we do not have direct control over the application. VEDATUDO must be applied in accordance with the instructions in our Data Sheet and in the MSDS.

We recommend observing the safety rules established by the competent sectors and the use of suitable PPE such as gloves and safety glasses.

The product should not be ingested or come into contact with the skin or eyes.

In case of accidental ingestion, do not force vomit. In contact with eyes, rinse well with water for an average of 10 to 15 minutes. In contact with the skin, wash well with soap and water and use moisturizer. If the problem persists, seek medical attention.

Keep out of reach of children and animals.


Notice: Trying to access array offset on value of type bool in /home1/drykoc75/public_html/wp-content/uploads/cache/c310af7367c9988242889dfd2884a2fffe9215fd.php on line 209

Notice: Trying to access array offset on value of type bool in /home1/drykoc75/public_html/wp-content/uploads/cache/c310af7367c9988242889dfd2884a2fffe9215fd.php on line 210
WhatsApp chat