DRYKOPOXI TX
1 kilo
Epoxy structural adhesive, thixotropic, bicomponent based on epoxy resin. Excellent adhesion to various substrates. Its pasty consistency does not run, making it possible to apply it to vertical surfaces.
Suitable for: suitable for bonding concrete, metal, wood, stones among others. Structural repair of old concrete with new concrete. Minor repairs to floors and stairs.
The surface must be clean, dry, free from oil, grease, rust and other contaminants and have porosity.
It is recommended to remove the cement cream and leave the surface rough to increase adhesion.
Homogenize the two components separately. Then add component B to component A and mix for at least 3 minutes until a homogeneous gray material is obtained.
Apply the product with a trowel, filling the entire surface, ensuring a thickness of approximately 2 mm.
The material to be glued must contact the DRYKOPOXY TOP within 2 hours, in its sticky state.
For anchors and anchors DRYKOPOXY TOP must be applied to the bar and placed in the hole with enough quantity to fill the space. The piece to be set must be placed slowly and with light circular movements.
CATEGORIES OF PRODUCTS
Notice: Trying to access array offset on value of type bool in /home1/drykoc75/public_html/wp-content/uploads/cache/c310af7367c9988242889dfd2884a2fffe9215fd.php on line 209
Notice: Trying to access array offset on value of type bool in /home1/drykoc75/public_html/wp-content/uploads/cache/c310af7367c9988242889dfd2884a2fffe9215fd.php on line 210