(11) 2088-5701
DRYKOMANTA GLASS
1 m - 10 m
DRYKOMANTA GLASS is an industrialized waterproofing asphalt blanket made from modified asphalt with
elastomeric polymers, reinforced with a glass fiber reinforced, flexible veil, tensile and tear resistance.
Indicated for:
- Áreas de baixas movimentações estruturais;
- Lajes de cobertura até 200 m²;
- Terraços, sacadas e varandas;
- Áreas frias: banheiros e cozinhas;
- Muro de arrimo e cortinas de concreto (lado do solo) e calhas
- Canaletas de cobertura.
The substrate for application of DRYKOMANTA GLASS must be clean, free of foreign bodies, form remains, iron tips, remains of mold release or impregnating products, flaws and nests. In smooth concrete, sand with a steel brush or mechanically to open porosity and remove release agents or curing agent.
Carry out regularization with a minimum drop of 1% towards the water drainage points for external areas and 0.5% for internal areas, prepared with cement mortar and medium sand 1: 4 trace, adding DRYKOFIX adhesive emulsion in the water of kneading for greater adherence to the substrate. The mortar must be finished with a minimum thickness of 2 cm.
Round sharp corners and edges. It is worth mentioning that lime should not be placed in the leveling mortar.
Emerging pipes and drains must be rigidly fixed. A 1 cm deep drawdown around the drains with a diameter of 50 cm is recommended.
In the building entrance gaps (doors, frames, etc.), the leveling should advance at least 60 cm inwards, under jambs and underframe, respecting the trim for the external areas, except for internal areas with floors in wood or degradable by moisture. It is recommended that the external areas have a dimension of at least 6 cm less than the internal dimensions, both at the level of waterproofing and at the level of the finished floor.
Cold joints and concrete joints can be treated with DRYKOPOXI or as recommended by the engineer responsible for the structure.
Blanket application
Fully unroll the first blanket in the center of the area, leaving it aligned and then roll it up again. Secure the blanket using the chosen application system.
Torch application
With the aid of the torch, direct the flame on the side of the DRYKOMANTA GLASS that will be set to the substrate, make sure that the flame simultaneously heats the printed substrate and the DRYKOMANTA GLASS.
Application with hot asphalt
Heat the ASFEL or ASFOX to 180 to 220 ° C and 160 to 180 ° C respectively, with the aid of a certified heater. Apply a uniform layer with the aid of jute yarn (skein) in the form of a spreader, on the side of the DRYKOMANTA GLASS and on the printed substrate. Apply layers to the coil at most 1 meter away from the substrate. Press from the center to the ends to remove excess and possible air bubbles.
The floor covering should rise 10 cm at the bottom and the floor covering should overlap the floor covering by 10 cm. In emergent drains and pipes, reinforcement should be performed with a blanket strip.
Valid for 60 months from the date of manufacture as long as the storage standards are respected.
Store in a covered, dry, ventilated place and away from heat sources, in environments with temperatures not exceeding 30 ° C and in an upright position.
Handle with care. Avoid strong shocks and contact with sharp surfaces.
Avoid getting the product near heat, flame or spark, avoid smoking.
We recommend observing the safety rules established by the competent bodies and the use of suitable PPE such as gloves and safety glasses.
The product should not be ingested or come into contact with the skin or eyes.
In case of accidental ingestion, do not force vomit. In contact with eyes, rinse well with water for an average of 10 to 15 minutes. In contact with the skin, wash well with soap and water and use moisturizer. Do not remove the product. Search for a doctor.
Keep out of reach of children and animals.
Not suitable for application in closed places, if necessary to create forced ventilation
CATEGORIES OF PRODUCTS
Notice: Trying to access array offset on value of type bool in /home1/drykoc75/public_html/wp-content/uploads/cache/c310af7367c9988242889dfd2884a2fffe9215fd.php on line 209
Notice: Trying to access array offset on value of type bool in /home1/drykoc75/public_html/wp-content/uploads/cache/c310af7367c9988242889dfd2884a2fffe9215fd.php on line 210
