(11) 2088-5701
DRYKOELASTIC
4 e 20 kg
Two-component cementitious waterproofing based on acrylic polymers, it works as a flexible and elastic membrane with high adhesion power.
Where to apply
- Internal cold areas;
- In-ground pools;
- Baldrames and foundations;
- Reservoirs and water tanks.
For other applications please consult our DRYKO technical team.
The substrate for application of DRYKOELASTIC must be clean, free of foreign bodies, remains of shapes, hardware tips, remnants of release or impregnating products, flaws and nests. In smooth concrete, sand with a steel brush or mechanically to open porosity and remove mold release agents or curing agent.
Carry out regularization with a minimum drop of 1% towards the water drainage points for external areas and 0.5% for internal areas, prepared with cement mortar and medium sand 1: 4 trace, adding DRYKOFIX adhesive emulsion in the water of kneading for greater adherence to the substrate. The mortar must have a finished finish, with a minimum thickness of 2 cm.
Add all component B (liquid) in a clean container and with the aid of a propeller mixer, start mixing by gradually adding component A (special cement powder). Mix components A and B mechanically for 5 minutes or for 10 minutes manually with clean rod until a homogeneous paste without lumps is formed.
Before starting the application of DRYKOELASTIC, you should moisten the surface without creating puddles or runoff. Depending on the ambient temperature, the surface must be constantly moistened before and during the application of DRYKOELASTIC.
To apply the product, use a soft broom, brush, brush or rectangular brush.
With the wet substrate apply the product in crossed coats, in uniform layers and without excess, respecting the interval between coats of 2 to 5 hours until reaching the recommended consumption.
After applying the DRYKOELASTIC first coat, reinforce the corners, drains, pipes and areas subject to movement with cracks and cracks with DRYKOTELA POLIÉSTER. Apply the following coats until reaching the recommended consumption, observing to fully cover the DRYKOTELA POLIÉSTER.
Mix the product every 15 minutes during application to prevent sedimentation of the solids.
In tanks, reservoirs and any other areas that will be in permanent contact with water, the surface of the product must be cleaned by washing with plenty of water before use.
Valid for 9 months from the date of manufacture as long as the storage standards are respected.
Store in a covered, dry, ventilated place and away from heat sources, in environments with a temperature not exceeding 30 ° C and in an upright position.
- Handle with care.
- We recommend observing the safety rules established by Organs competent bodies and the use of suitable PPE.
- The product should not be ingested or come into contact with the skin or eyes.
- In case of accidental ingestion, do not force vomit. In contact with eyes, rinse thoroughly with water for at least 15 minutes. In contact with the skin, wash well with soap and water and use moisturizer. Search for a doctor.
- Keep out of reach of children and animals.
- Indoors, if necessary, create forced ventilation.
For more information on handling and safety, consult the product MSDS, available on our website. - Dispose of contents / container to an approved treatment and disposal facility. Do not reuse the packaging.
EMBALAGENS DISPONÍVEIS
DRYKOELASTIC
DRYKOELASTIC
CATEGORIES OF PRODUCTS
Notice: Trying to access array offset on value of type bool in /home1/drykoc75/public_html/wp-content/uploads/cache/c310af7367c9988242889dfd2884a2fffe9215fd.php on line 209
Notice: Trying to access array offset on value of type bool in /home1/drykoc75/public_html/wp-content/uploads/cache/c310af7367c9988242889dfd2884a2fffe9215fd.php on line 210
