DRYKO DESMOLDANTE
200 L

Mix the product for approximately 3 minutes before application. Apply with a brush a coat, waiting for drying. After application, the molds must be protected from rain.

Consumption will vary depending on the type of shape and the conditions for casting the concrete. With each new reuse of the form, the product must be applied. You must not fill the form with the DRYKODESMOLDANTE still wet. For concretes that will receive painting or coating, they should be brushed and washed with mild soap.

Validity of the product is 12 months from the date of manufacture, provided that it is stored upright, in its original and intact packaging, in a dry, well-ventilated place and away from heat under a maximum temperature of 25 ºC.

We guarantee the quality of our products against manufacturing defects. We do not assume responsibility for the poor performance of the work due to incorrect use and because we do not have direct control over the application.

The product must be applied by a qualified professional and in accordance with the instructions in our technical bulletin and in the Product Safety Data Sheet.

We recommend observing the safety rules established by the competent bodies and the use of suitable PPE such as gloves and safety glasses.

The product should not be ingested or come into contact with the skin or eyes.

In case of accidental ingestion, do not force vomit. In contact with eyes, rinse well with water for an average of 10 to 15 minutes. In contact with the skin, wash well with soap and water and use moisturizer. If the problem persists, seek medical attention.

Keep out of reach of children and animals.