DRYKOFITA ALUMÍNIO
5 a 90 cm x 10 m

GENERAL INFORMATION

Self-adhesive multipurpose tape, a product composed of asphalt modified by special adhesive polymers, with an aluminum film on the top that reflects the sun’s rays and allows the product to be exposed in the indicated applications.

Suitable for: roofs, flashings, ventilation ducts and air conditioning, sheds, domes, awnings, gutters and slabs. Indicated for areas that do not require mechanical protection and ensuring watertightness and high thermal reflection. It is not recommended to be applied in places subject to high temperature.

APPLICATION VIDEO

PRICE QUOTE

Put down the amount you would like to put in your budget, after adding your product you can close and send your order.

UNITS

DOWNLOAD DATA SHEET

DOWNLOAD MSDS

Roofs, flashings, ventilation and air conditioning ducts, sheds, domes, awnings, gutters and slabs. Indicated for areas that do not require mechanical protection and ensuring watertightness and high thermal reflection.

* Not suitable for places subject to high temperature.

Carry out surface cleaning in such a way as to remove all loose particles and residues.

After the substrate has completely dried, use the DRYKOPRIMER ACQUA or DRYKOPRIMER ECO asphalt solution, wait for the drying time. Remove the plastic film and start applying DRYKOFITA ALUMÍNIO, pressing against the printed surface to increase its adhesion and effectiveness.

** If necessary on some concrete substrates, perform regularization with a minimum drop of 1% towards the water drainage points, prepared with cement mortar and medium sand 1: 4 trace, adding DRYKOFIX CHAPISCO adhesive emulsion in the mixing water for greater adherence to the substrate. It is worth mentioning that no type of water repellent should be placed in the regularization mortar. This mortar should have a finished finish, with a minimum thickness of 2.0 cm.

In larger areas: Apply a single coat of asphalt solution for priming DRYKOPRIMER ACQUA on the substrate and wait for it to dry. After aligning the DRYKOFITA ALUMÍNIO for subsequent application as mentioned above.

Validity of 24 months from the date of manufacture, provided that it is stored upright, in its original and intact packaging, in a dry, well-ventilated place and away from heat sources.

We recommend observing the safety rules established by the competent sectors and the use of suitable PPE such as gloves and safety glasses.

The product should not be ingested or come into contact with the skin or eyes.

In case of accidental ingestion, do not force vomit. In contact with eyes, rinse well with water for an average of 10 to 15 minutes. In contact with the skin, wash well with soap and water and use moisturizer. If the problem persists, seek medical attention.

Keep out of reach of children and animals.